![]() The specific examples shown were run on an Ubuntu 18.04 machine. An example difference is that your distribution may support yum instead of apt. The install instructions here will generally apply to all supported Linux distributions. ![]() PyTorch is supported on Linux distributions that use glibc >= v2.17, which include the following: Prerequisites Supported Linux Distributions It is recommended, but not required, that your Linux system has an NVIDIA or AMD GPU in order to harness the full power of PyTorch’s CUDA support or ROCm support. Depending on your system and compute requirements, your experience with PyTorch on Linux may vary in terms of processing time. It'll also stay at a load if you've done anything like mess with the OC Genie/automatic overclock, changed vcore in bios, tampered with bios settings on a multitude of ways like disable speed step or c-states etc.PyTorch can be installed and used on various Linux distributions. Moving the mouse is a load, so the cpu will not idle if you keep moving the mouse to keep the Screensaver disabled or the monitor active. ![]() OC will change that, as will locking the cores at max boost of 4.9GHz, both of which drastically increase power usage, and therefore heat output. For the 9700k, that's 1 core at 4.9GHz, 2 cores at 4.8GHz, 3-4 cores at 4.7GHz and 5-8 cores at 4.6GHz. It's usually pretty pathetic.Īt loads over 30% (which is basically anything you start up) the cpu goes to best performance mode and will turbo/boost according to temps and power limits. Idle, base, boost.Īt idle, the cpu backs off on core speeds and voltage use, so temps are set according to ambient case temps and efficiency of cooler.Īt minimal loads, under 30%, you get base speeds, which is the factory set speed to determine TDP.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |